background image

6

EN

GENERAL SAFETY WARNINGS FOR 

YOUR LASER LEVER

 

WARNING: Read all safety warnings 

and all instructions. 

Failure to follow 

the warnings and instructions may result in 
serious injury.

Save all warnings and instructions for 
future reference.

These lasers do not normally present an optical 
hazard although staring at the beam may cause 
flash blindness.
Do not stare directly at the laser beam. A 
hazard may exist if you deliberately stare into 
the beam, please observe all safety rules as 
follows:
1.   Laser radiation, do not stare into beam.
2.   The laser shall be used and maintained 

in accordance with the manufacturer’s 
instructions.

3.   Never aim the beam at any person or an 

object other than the work piece.

4.   The laser beam shall not be deliberately 

aimed at another person and shall be 
prevented from being directed towards 
the eye of a person for longer than 0.25 
seconds area.

5.   Always ensure the laser beam is aimed 

at a sturdy work piece without reflective 
surfaces, e.g. wood or rough-coated 
surfaces are acceptable. Bright shiny 
reflective sheet steel or similar is not 
suitable for laser applications as the 
reflective surface may direct the laser 
beam back at the operator.

6.   Do not change the laser device with a 

different type. The manufacturer or an 
authorized agent must carry out repairs.

7.   CAUTION: Use of controls or adjustments 

other than those specified herein may 
result in hazardous radiation exposure.

8.   Do not use this product in flammable, 

explosive, corrosive environments or near 
medical equipment or aircraft.

SAFETY WARNINGS FOR BATTERY 

1.   Use the recommended type of dry battery, 

different type of batteries may cause 
damage.

2.   Do not expose the battery to an overheating 

environment, such as sunlight or fire, which 
may explode, cause fire or personal injury.

3.   Do not short-circuit or disassemble the 

battery, which may explode, cause fire or 
personal injury.

4.   The battery may leak if the device is not 

used properly. In case of battery leakage, 
carefully remove the liquid with a cloth. 
Once contact battery liquid, wash with 
running water immediately, and seek 
medical help immediately if liquid splashes 
into eyes.

5.   Do not charge for batteries that are not 

suitable for recharging. 

6.   Keep the battery away from children 

because of the risk of swallowing.

7.   Children are not allowed to use the tool, 

which is not a toy.

8.   Remove the batteries to prevent battery 

leakage if you do not intend to use the tool 
for a long time.

SYMBOLS 

To reduce the risk of injury, user 

must read instruction manual

  

DO NOT STARE INTO BEAM

  

LASER RADIATION

Class III appliance

 Warning

Waste electrical products must 

not be disposed of with household 

waste. Please recycle where 

facilities exist. Check with your 

local authorities or retailer for 

recycling advice.

Summary of Contents for TLM051

































Reviews: