Wesco DTI10, Manual Manual

Page: 27 / 86

24
4
Cd (Cool down)
This is the cool down time, which needs to be executed after the drying time.
Press the middle button to continue.
XX
If necessary, change this value (default 5 minutes) by means of the + or - button between 1 and 30 minutes.
Confirm the adjustment by means of the middle button.
FLS (Flash: alternate description of the remaining drying time and the dry temperature).
Press the middle button to continue.
YES or no
Select by means of the + button.
no:
The remaining drying time will appear during operation.
YES
:Besides the remaining drying time, also the dry temperature is appearing alternately during operation.
Confirm the adjustment by means of the middle button.
rtP (Flash : indication of the programmed or real drying temperature)
Press the middle button to continue.
YES or no
Select by means of the + button.
no:
only the programmed drying temperature will be displayed during the cycle
YES
: only the real drying temperature will be displayed during the cycle
Confirm the adjustment by means of the middle button.
rEM (REMOTE START : central coinsystem)
Press the middle button to continue
YES or no
Select by means of the + button
YES
: if the dryer is connected to a central operating panel (see 3. Installation and connection).
Otherwise select
no
.
Confirm the adjustment by means of the middle button.
StM (Steam: steam heating)
Push the middle button to continue.
YES or no
Select with the + button.
YES
: if the machine is warmed up with steam.
In the other case, select no.
Confirm the programmation with the middle button.