Wesco DTI10, Manual Manual

Page: 17 / 86

14
4
For dryers without reversing, the program goes immediately to "
Cd
".
St 3 (Stop time between lift - right movement of the drum)
Press the middle button to continue.
XX
Change if necessary this value (default 5 seconds) by means of the + or - button between 0 and 10 seconds.
Confirm the adjustment by means of the middle button.
When "0" is filled in, the program goes immediately to " Cd ". Because of this, the program will be executed
withour reversing.
Ar 3 (Action time of the drum right movement)
Press the middle button to continue.
XX
Change if necessary this value (default 30 seconds) by means of the + or - button between 5 and 120 seconds.
Confirm the adjustment by means of the middle button.
AL 3 (Action time of the drum left movement)
Press the middle button to continue.
XX
Change if necessary this value (default 20 seconds) by means of the + or - button between 5 and 120 seconds.
Confirm the adjustment by means of the middle button.
Cd (Cool down)
This is the cool down cycle, which needs to be executed after the dry cycle.
Press the middle button to continue.
XX
If necessary, change this value (default 5 minutes) by means of the + or button between 1 and 30 minutes.
Confirm the adjustment by means of the middle button.
FLS (Flash: alternate description of the remaining dry time and the dry temperature).
Press the middle button to continue.
YES or no
Select by means of the + button.
no:
The remaining dry time will appear during operation.
YES : Besides the remaining dry time, also the dry temperature is appearing alternately during operation.
Confirm the adjustment by means of the middle button.
rtP (Flash : Angabe der programmierten oder reellen Trockentemperatur).
Press the middle button to continue.
YES or no
Select by means of the + button.
no:
only the programmed drying temperature will be displayed during the cycle
YES : only the real drying temperature will be displayed during the cycle
Confirm the adjustment by means of the middle button.