Wesco DTI10, Manual Manual

Page: 15 / 86

12
4
TE 2 (temperature program 2)
Press the middle button to continue.
XX
If necessary, change this value (default 55°C/131°F) by means of the + or - button between 25°C/77°F and 90°C/194°F.
Press the middle button to continue.
Ti 2 (dry cycle program 2)
Press the middle button to continue.
XX
If necessary, change this value (default 30) by means of the + or button between 1 and 120 minutes.
Confirm the adjustment by means of the middle button.
For dryers without reversing, the program goes immediately to " TE3 ".
St 2 (Stop time between lift - right movement of the drum)
Press the middle button to continue.
XX
Change if necessary this value (default 5 seconds) by means of the + or - button between 0 and 10 seconds.
Confirm the adjustment by means of the middle button.
When "0"
is filled in, the program goes immediately to "
TE3
". Because of this, the program will be executed
without reversing.
Ar 2 ( Action time of the drum right movement)
Press the middle button to continue.
XX
Change if necessary this value (default 30 seconds) by means of the + or - button between 5 and 120 seconds.
Confirm the adjustment by means of the middle button.
AL 2 ( Action time of the drum left movement)
Press the middle button to continue.
XX
Change if necessary this value (default 20 seconds) by means of the + or - button between 5 and 120 seconds.
Confirm the adjustment by means of the middle button.
TE 3 (temperature program 3)
Press the middle button to continue.
XX
If necessary, change this value (default 70°C/158°F) by means of the + or - button between 25°C/77°F and 90°C/194°F.
Confirm the adjustment by means of the middle button.
Ti 3 (dry cycle program 3)
Press the middle button to continue.
XX
If necessary, change this value (default 30 minutes) by means of the + or - button between 1 and 120 minutes.
Confirm the adjustment by means of the middle button.