TRIPOD SYSTEM
USER INSTRUCTIONS
Page 7
ENGLISH
S
NAP
HOOKS
AND
C
ARABINERS
Snap hooks and carabiners used in the Tripod System, marked with the ANSI
Z359.1-07 or ANSI Z359.12-09 standard, are self-locking with a minimum tensile
break strength of 5,000 pounds (22.2 kN), and a 3,600 pound (16 kN) gate rating.
SYSTEM COMPONENTS
C
OMPATIBILITY
L
IMITATIONS
All components and subsystems used with the Tripod System have been tested
as part of a complete fall arrest system. Only components and subsystems
approved by Werner Co. are to be used with the Tripod System.
A
NCHORAGE
C
ONNECTORS
T
RIPOD
: T100009
The high strength aluminum Tripod extends from 70 inches (1.7 m) to 84 inches
(2.1 m) for installation over openings with a maximum diameter of 72 inches
(1.8 m) at lowest height to a diameter up to 80 inches (2.0 m) at tallest height.
The head of the Tripod includes two
⅝
inch forged steel eye bolts. The eye bolts
are for ANSI Z359.1-07 and ANSI Z359.4-07 direct connection of fall arrest and
rescue subsystems.
The aluminum feet have rubber skid pads and a safety chain to help prevent the
legs from spreading apart.
SRL-R M
OUNTING
B
RACKET
: T210030B, T210060B,
T210100B
The steel Mounting Bracket attaches to any leg of the tripod. The T210030B is
designed to fi t the T210030 3-Way Self Retracting Lifeline with Rescue Capability
(SRL-R), the T210060B is designed to fi t the T210060 SRL-R and the T210100B
is designed to fi t the T210100 SRL-R.
M
ATERIAL
H
OIST
M
OUNTING
B
RACKET
: T510000B
The steel Mounting Bracket attaches to any leg of the tripod. The T510000B is
designed to fi t the T510045 Hoist.
P
ULLEY
: T200001
The aluminium alloy Pulley is designed for use with up to a
7⁄16
inch (12 mm)
diameter steel cable. The Pulley has a 8,100 pound (36 kN) tensile breaking
strength.
