WERKU WK401210, Original Instructions Manual

Page: 4 / 44

English
4
MAINTENANCE.
Check moving parts for misalignment or binding,
there are no broken parts or other conditions that
may affect the operation of power tools. Power tools
are repaired before use when they are damaged.
Many accidents are caused by poorly maintained
power tools. Use power tools, accessories and
tool tips, etc. according to these instructions and
in the manner provided for the particular type of
power tool, taking into account the conditions work
and work to develop. The use of the power tool for
applications other than those intended could result
in a dangerous situation. Please check your power
tool serviced by a Werku
®
official repair service
using only identical replacement parts. This will
ensure the safety of the power tool is maintained.
CHECK CONDITION.
Make sure that all the screws in the power tools
are perfectly tightened. In cold climates or when the
power tools has not been used for a period, allow the
power tools to warm up by leaving it to run empty for
a few minutes, to ensure that all internal components
are perfectly lubricated. Make sure that the possible
installed accessories are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the power tool is firmly supported before
using. Check that no one is standing beneath you when
using the power tool in high areas. Keep your hands
away from all moving parts of the power tool.
DURING THE OPERATION.
Do not leave the power tool operating without ha-
ving it firmly fixed. Only turn it on when you are
sure you have full control over it. Do not point the
power tool at anyone while in use. When operating
the power tool will produce vibrations. The screws
may gradually come loose, and possibly cause
faults or accidents. Keep your hands away from all
moving parts of the power tool.
AT FINISH WORKING.
Do not touch the possible accessories installed in
the paint spray gun after use. It may be hot and
cause burns. Some materials worked with may
contain chemicals or toxic components. Avoid
inhaling these substances or allowing them to come
into contact with your skin. Use PPE designed to
prevent and protect against incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The paint spray gun has been designed to carry out
jobs of painting. Refer to this plan to familiarize your-
self with the paint spray gun before use.
9
5
6
4
1
6
7
3
2
8
1. Cup.
2. Sprayer.
3. Trigger.
4. Nozzle regulator.
5. On/Off switch.
6. Hose connector
7. Nozzle replacement.
8. Transport handle.
9. Head release button.
USE INSTRUCTIONS.
Before starting up the paint spray gun, we recom-
mend that you carefully read all of the instructions
as indicated. Please respect all regulations regar-
ding the prevention of accidents, health and safety
directives, laws and applicable restrictions for work
places. The paint spray gun must only be used by
persons who have been instructed in its use and
only for the purposes for which it has been designed.
POWER SUPPLY.
Make sure the power supply is adapted to the requi-
rements shown on the information panel of the paint
spray gun (1). Using the motor at low voltage will
make it operate slowly. This will reduce performance
and may cause the motor to overheat.
EXTENSION CORD.
If the working area is at some distance from the
power supply, use an extension cord of enough dia-
meter and quality.
PREPARATION.
Do not use textured paints as they will block the
paint spray gun. To obtain a perfect finish, the sur -
face being painted must be prepared, and the paint
diluted until reaching the correct degree of viscosi-
ty. Make sure that the surface being painted is free