WERKU WK400280, Original Instructions Manual

Page: 2 / 48

English
2
CE DECLARATION CONFORMITY.
Werku
®
declares that the WK400280 cordless
driver drill is in accordance with the following
European Directives and Standards:
2006/42/CE
2014/30/EU
EN62841-1:2015
EN62841-2-1:2018+A11:2019
EN55014-1:2017
EN55014-2:2015
La Coruña, 01/06/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency ............................. 230V~50Hz
Battery ................................. 12V 2.0 AH Li-ion
Battery charge .............................................. 1.5 h
Protection degree ......................................... IP20
Speed rate range I ............................... 0-350 min
-1
Speed rate range II ............................ 0-1100 min
-1
Torque positions ............................................ 17+1
Chuck measure ...................................... < 10 mm
Driving capacity ........................................... 6 mm
Wood drilling capacity ............................... 20 mm
Metal drilling capacity .................................. 8 mm
Acoustic pressure LpA ............................ <69 dB(A)
Respective uncertainity KpA .................... 5 dB(A)
Acoustic power LwA .............................. <80 dB(A)
Respective uncertainity KwA .................... 5 dB(A)
Vibration Ah*........................................ <1.654 m/s²
Respective uncertainity Kh*.......................1.5 m/s²
*Drilling into metal
VIBRATION.
The declared vibration total value has been mea-
sured in accordance with a standard test method
and may be used for comparing one power tool
with another. The declared vibration total value
may also be used in a preliminary assessment of
exposure. Warning; the vibration emission during
actual use can differ from the declared total value
depending on the ways in which this cordless drill
is used. Warning; please identify safety measures
to protect the operator, based on an estimation of
exposure in the actual conditions of use.
PICTOGRAMS.
Read instruction manual
Wear eye protection
Wear ear protection
European conformity
SGS-GS certification
2002/96/CE directive
SAFETY INSTRUCTIONS.
This power tool is intended to function as a dri-
ver drillv. Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or se -
rious injury. Keep all warnings and all instructions
for future reference. Accidents can be avoided in
many cases by recognizing a potentially hazar-
dous situation before it occurs and by observing
appropriate safety procedures. Operations for
which this power tool was not designed may crea-
te a hazard and cause personal injury.
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered
anddark areas invite accidents. Do not operate
this power tool near flammable materials. Sparks
could ignite these materials. Keep away from chil-
dren and curious while operating a power tool.
Distractions can cause you to lose control. Keep
bystanders a safe distance away from work area.
Anyone entering the work area must wear per-
sonal protective equipment. Fragments of work
piece or of a broken accessory may fly away and
cause injury beyond immediate area of operation.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while being tired or under the in-
fluence of drugs, alcohol or medicines. A moment
of inattention while operating power tools may
cause damage serious personal damage.