Keypad and Display
4-3
4
Run
LOC
1800rpm
12:35
Menu
Run
LOC
1800rpm
12:35
Menu
1800
rpm
1.0
A
60.0
Hz
When power is applied to the inverter, the display automatically enters the monitoring mode. Figure 4.3
(a)
presents the monitoring screen displayed for the factory default settings. By properly setting specific inverter
parameters, other variables can be displayed in the monitoring mode or the value of a parameter can be
displayed using bar graphs or with larger characters as presented in figures 4.3
(b)
and
(c)
.
Inverter status:
- Run
- Ready
- Config
- Self-tuning
- Last fault: FXXX
- Last alarm: AXXX
- etc.
Indication of the direction
of rotation of the motor.
Indication of the
control mode:
- LOC: local mode;
- REM: remote mode.
Indication of the motor
speed in rpm.
Monitoring parameters:
- Motor speed in rpm;
- Motor current in Amps;
- Output frequency in Hz (default).
P0205, P0206, and P0207: selection of parame-
ters that will be displayed in the monitoring mode.
P0208 to P0212: engineering unit for the speed
indication.
Right soft key feature.
Clock.
Settings via:
P0197, P0198, and P0199.
Left soft key feature.
rpm
A
Hz
Monitoring parameters:
- Motor speed in rpm;
- Motor current in Amps;
- Output frequency in Hz (default).
P0205, P0206, and P0207: selection of parameters
that will be displayed in the monitoring mode.
P0208 to P0212: engineering unit for the speed
indication.
100%
10%
100%
Figure 4.3
- Keypad monitoring modes
D0RQLWRULQJVFUHHQZLWKWKHIDFWRU\GHIDXOWVHWWLQJV
E([DPSOHRIDPRQLWRULQJVFUHHQZLWKEDUJKDSKV
F([DPSOHRIDPRQLWRULQJVFUHHQGLVSOD\LQJDSDUDPHWHUZLWKDODUJHUIRQWVL]H
F ([DPSOH RI D PRQLWRULQJ VF
Run
LOC
1800rpm
12:35
Menu
1800
Value of one of the parameters defined in P0205,
P0206, or P0207 displayed with a larger font size.
Set parameters P0205, P0206 or P0207 to 0 if it is not
desirable to display them.
rpm
