Wenglor P1PA00 Series, Operating Instructions Manual

Page: 14 / 21

14 Installation and Electrical Connection
5. Installation and Electrical Connection
5.1. Installation
P1PA001, P1PA002
«PP
• Protect the product from contamination during installation.
• Observe all applicable electrical and mechanical regulations, standards, and safety rules.
• Protect the product against mechanical influences.
• Make sure that the sensor is mounted in a mechanically secure fashion.
• If the object has smooth surfaces, the angle between the axis of the sound waves and the surface of the
object should be 90° ±3°. The angle can be considerably larger in the case of rough object surfaces.
• Objects to be detected must be in the working range of the sensor.
• Specified torque values must be complied with (see
““3. Technical Data” on page 9 ).
ATTENTION!
Risk of property damage in case of improper installation!
The product may be damaged.
• Follow installation instructions.
CAUTION!
Risk of personal injury or property damage during installation!
Personal injury and damage to the product may occur.
• Ensure a safe installation environment.