Wenglor P1PA00 Series, Operating Instructions Manual

Page: 16 / 21

16 Installation and Electrical Connection
Contamination Warning Flowcharts
not detected not detected detected
beginning contamination
Object Object Object
not detected not detected detected
Reflex Mode no contamination
Object Object Object
Object
Switching Status
Indicator
Object
Switching Status
Indicator
Object
Switching Status
Indicator
not detected not detected not detected
advanced contamination
Object Object Object
off off on
off off
off off
blinking
off
Required Action in Case of Fault:
NOTE!
• Shut down the machine.
• Analyze and eliminate the cause of error with the aid of the diagnostics information.
• If the error cannot be eliminated, please contact wenglor’s support department.
• Do not operate in case of indeterminate malfunctioning.
• The machine must be shut down if the error cannot be definitively explained or properly
eliminated.
DANGER!
Risk of personal injury or property damage in case of non-compliance!
The system’s safety function is disabled. Personal injury and damage to equipment may
occur.
• Required action as specified in case of fault.