Wenglor OY1TA603P0003, Operating Instructions Manual

Page: 60 / 64

60
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
EN
You can now navigate within the menu using the F1, F2 and F3 keys on your keyboard.
8.2 Remote Control with Interface Commands
1. Connect the sensor as described in chapter 7 above.
2. Set the sensor to the interface operating mode.
• Select <Interface> from the menu.
• Select <Mode>.
• Select <Comm>.
The sensor is now ready for interface communication.
The interface protocol for the Y1TA can be downloaded as a PDF document from our website at
www.wenglor.com under the “download” heading.
9. Maintenance Instructions
• This wenglor sensor is maintenance-free.
• It is advisable to clean the lens and the display, and to check the plug connections at regular intervals.
• Do not clean with solvents or cleansers which could damage the device.
10. Proper Disposal
wenglor sensoric gmbh does not accept the return of unusable or irreparable products. Respectively valid
national waste disposal regulations apply to product disposal.