Wenglor OY1TA603P0003, Operating Instructions Manual

Page: 34 / 64

34
Sensors for your success www.wenglor.com Sensors for your success www.wenglor.com
EN
1. Use for Intended Purpose
The transmitter and the receiver are integrated into a single housing.
The sensors measure the distance between the sensor and the object.
They function in accordance with the principle of transit time measurement. For this reason, the object‘s color,
shape and surface characteristics have practically no influence on measurement results. Even dark objects can
be reliably recognized against bright backgrounds.
Large working ranges and distances are achieved by these sensors.
The sensors work directly onto the object.
2. Safety Precautions
2.1 Safety Precautions
à
This operating instruction is part of the product and must be kept during its entire service life.
à
Read this operating instruction carefully before using the product.
à
This product is not suitable for safety applications.
à
Installation, start-up and maintenance of this product should only be carried out by trained personal.
à
Tampering with or modifying the product is not permissible.
à
Protect the product against contamination during start-up.
2.2 Laser/LED warning
For the respective Laser/LED Class please view the technical data of the product.
Class Laser 1 (EN 60825-1)
Observe all applicable standards
and safety precautions..
Class Laser 2 (EN 60825-1)
Observe all applicable standards and safety precautions.
The enclosed laser warning labels must be attached and
visible at all time. Do not stare into beam..
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure
LASER RADIATION -
DO NOT STARE INTO BEAM
620 - 690 nm < 1mW
CLASS 2 LASER PRODUCT
CAUTION
LASER CLASS 1
EN60825-1
2007
LASER CLASS 2
EN60825-1