12
EN
4.5.3. Dynamic Teach-In (Teach-In with moving objects)
• Set rotary selector switch (07) to Teach
• Press and hold the plus button (24) until (24) blinks at the plus button (after approx. 5 sec)
è
The Sensor is now in the recording mode and acquires minimum and maximum incoming light signals
• Activate the plus button (24) again
è
The recording mode is ended
è
Plus button (24) is no longer illuminated
• Set rotary selector switch (07) to Run
The switching output is not active during Teach-In.
fig. 9 Dynamic Teach-In
Scanning and barrier modes
The Sensor automatically determines the ideal switching point between the minimum and maximum incoming
light signals acquired during the recording mode.
If the red LED (02) blinks after completion of dynamic teach-in, the difference between the two incoming signals is too small.
