6
INSTALLATION
CONTINUED
INSTALL THE MOUNTING BRACKET
1. Remove the Mounting Bracket from the shipping box.
2. locate the Hardware Bag and set it aside.
3. Align the Mounting Bracket to the wall with the top edge of the Mounting Bracket on the Horizontal
lIne and the centerline of the Mounting Bracket (user must mark the Bracket centerline with chalk)
aligned to the Station Centerline on the wall as shown below.
4. for walls with
wood stud construction
do as follows.
For metal stud or masonry wall construction,
go to step 5.
a. Hold the Mounting Bracket in place and note the position of the studs.
Note:
The mounting bracket must crosss at least one stud.
b.
If the Mounting Bracket crosses two studs
, attach the Bracket with four 1/4x3" Hex Head lag
Screws (supplied by end user), two in each stud.
c.
If the Mounting Bracket crosses one stud
, attach the Bracket with two 1/4x3" Hex Head lag
Screws (supplied by end user) to the stud and then attach the Bracket to the wall with four
heavy duty drywall anchors (consult a local hardware supplier).
Station Centerline
Mounting Bracket
Position of Studs
Horizontal line for Top Edge
of Mounting Bracket
Mounting Bracket Centerline
3
4b
Position of Studs
Bracket crosses two studs.
Hex Head lag
Screw, 1/4x3"
!
WARNING
Always wear safety
glasses and safety
shoes when
installing the Studio
Makeup Station to
avoid serious injury.
Mark the Bracket centerline
with caulk on the top
surface of the Bracket.
4c
Bracket crosses one stud.
Position of Stud
Hex Head lag Screw, 1/4x3"
Mounting Bracket Centerline
Mounting Bracket
Centerline
