14
INSTALLATION
CONTINUED
CONNECT THE ELECTRICAL SOURCE
Warning: To reduce the risk of burns, fire, electric shock or injury to persons, observe the
following warnings.
•
Never connect the electrical source until all of the Makeup Stations are
completely assembled with Mirrors and Counters in place.
•
Never connect the Makeup Stations to an inadequate electrical circuit.
•
Always have an electrical engineer design or review the circuits to make sure that
they comply with electrical codes and anticipated use.
•
Always have a licensed electrician make any electrical connections.
•
Never modify the wiring inside the Makeup Stations.
•
Never allow anyone to use the Makeup Stations until all electrical work is
complete and light bulbs are installed.
Notes to the Electrician:
1. The Studio Makeup Station has separate conductors for the lights and the receptacle (see illustration
below). The wiring plan for the room may include separate circuits for lights and receptacles.
2.
From N.E.C. Article 520.73 (2002)
: All lights and any receptacles adjacent to the mirror(s) and
above the dressing table counter(s) installed in dressing rooms shall be controlled by wall switches
installed in the dressing room(s). Each switch controlling receptacles adjacent to the mirror(s) and
above the dressing table counter(s) shall be provided with a pilot light located outside the dressing
room, adjacent to the door to indicate when the receptacles are energized. Other outlets installed in
the dressing room shall not be required to be switched.
3.
If the wiring plan for the room does not comply
with the above code requirement, check with the
electrical engineer or local code official before proceeding.
4. Never sit or stand on the counter or use it for holding tools while connecting the Makeup Station to
the electrical source.
White, Neutral
Black, 120 VAC
Green, Ground
Conduit
TACKBOARD INSTALLATION
Refer to the Studio Makeup Station Owner’s Manual for Tackboard installation instructions.
