13
1. Remove the Mirror from the shipping carton and inspect the Mirror for damage.
2. With two people working together, place the Mirror against the frame about an inch from the top
with Mirror flange at the bottom.
3. Slide the Mirror upward until the Mirror flange contacts the frame and the top clips engage the
frame..
4. With one person holding the Mirror in place, attach the two Pan Head Screws (included with the
Mirror in the sleeve) that hold the Mirror to the frame.
Caution: Tighten the Pan Head Screws only enough to be
snug. Over tightening will strip the threads in the
Frame.
Mirror
Pan Head Screw
Slide the Mirror upward until the top
clips engage the flange on the Frame.
Pan Head Screw
Shelf Bottom Surface
INSTALLATION
CONTINUED
ATTACH THE MIRROR
ATTACH THE COUNTER
1. Assemble the Counter to the Makeup Station.
a. Remove the Counter from the carton and locate the four Pan Head Screws in the Hardware
Bag.
Note:
If there is a strap or tape attaching the flexible conduit to the Counter Support Bracket, remove
the strap or tape before placing the Counter onto the Counter Support Brackets.
b. Place the Counter onto the Counter Support Brackets and slide it into place.
c. It may be necessary to lift the curved edge of the
Counter slightly upward to fit it into the space in the
frame.
d. Attach the Counter to the Counter Support Brackets with
the four Pan Head Screws
Caution: Tighten the Pan Head Screws only enough to be
snug. Over tightening the screws will strip the
threads in the Counter.
Pan Head Screw
Counter Bottom Surface
Counter Support Brackets
