6
7
6
TABLE SAW STAND SAFETY
1. Place the table saw stand on a flat and level surface to
prevent rocking or tipping.
2. Do not climb, sit, or stand on the stand.
3. Follow the assembly instructions carefully when in-
stalling the stand.
4. This product is designed to be used as a stand for
table saws. Any misuse or abuse of the stand can result
in product damage or personal injury. Do not exceed the
capacity of the stand.
5. The height of the power tool mounted to the stand
should not exceed the width of the tool in order to pre-
vent the stand from tipping over. The power tool must
be centered and properly secured to the table saw stand.
Always check to make sure the stand and the power tool
are stable before operation.
6. Keep proper footing and balance at all times. Do not
overreach when operating the table saw.
7. Be careful not to pinch yourself when folding and un-
folding the legs.
8. Make sure all fasteners, including those used to
mount the saw to the stand, are securely tightened be-
fore moving, folding, or unfolding the stand.
9. When moving the saw and stand, set the stand gently
on the ground. Do not let it crash down. Doing so could
damage the stand or saw.
10. Have another person help you lift the table saw onto
the stand, if necessary. Don't try to lift the saw yourself
if you think you can't lift it; you may hurt yourself.
11. Follow all warnings and directions in your saw’s
owner’s manual regarding safe and proper use of the
saw.
TABLE SAW STAND SAFETY WARNINGS
WARNING!
Do not operate the power tool until you have read and understood the following instructions
and the warning labels.
