background image

INTRODUCTION

Thanks for purchasing the WEN pressure washer. We know you are excited to put your tool to work, 

but first, please take a moment to read through the manual. Safe operation of this tool requires that 

you read and understand this operator’s manual and all the labels affixed to the tool. This manual 

provides information regarding potential safety concerns, as well as helpful assembly and operating 

instructions for your tool. 

NOTE: 

The following safety information is not meant to cover all possible conditions and situations 

that may occur. WEN reserves the right to change this product and specifications at any time without 
prior notice.

Keep this manual available to all users during the entire life of the tool and review it 

frequently to maximize safety for both yourself and others. 

      WARNING:

 Indicates danger, warning, or caution. The safety symbols and the explanations 

with them deserve your careful attention and understanding. Always follow the safety 
precautions to reduce the risk of fire, electric shock and personal injury. However, please 
note that these instructions and warnings are not substitutes for proper accident prevention 
measures. 

3

Summary of Contents for PW3100
























Reviews: