background image

TABLE OF CONTENTS

Specifications .................................................................................................. 2
Introduction .................................................................................................... 3
Identification & Service Record ....................................................................... 4
General Safety Rules ....................................................................................... 5
Safety Rules for Pressure Washers ................................................................. 7
Know Your Pressure Washer ........................................................................... 9
Preparation .................................................................................................... 11
Operation ...................................................................................................... 14
Maintenance .................................................................................................. 17
Storage & Transport ...................................................................................... 21
Troubleshooting Guide .................................................................................. 22
Warranty Statement ....................................................................................... 23

SPECIFICATIONS

Model Number

PW3100

Max. Pressure

3100 PSI

Max. Flow

2.5 GPM - 3100 PSI

Nozzles

0°, 15°, 25°, 40°, Soap Nozzle

Gun to Lance Connection

M22 Threaded

Gun to Hose Connection

M22 Threaded

Lance

20” Stainless Steel

Lance to Nozzle Connection

Quick Change

Pump

Axial Cam

Detergent Tank Capacity

0.25 Gallon

Hose Inner Diameter

5/16”

Hose Length

30’

Wheel

12”

Weight

67 lbs

ENGINE

Engine type

4 stroke, OHV, single cylinder with forced air cooling system

Spark plug gap

0.7 - 0.8 mm (0.028 - 0.031 in)

Spark plug torque

1/2 - 3/4 turn after gasket contacts base or 15 ft.lb

Displacement

208 cc

Fuel tank capacity

0.9 gallon 87 octane minimum

Oil capacity

15.3 fl. oz (450 ml)

Lubrication system

Splash lubrication

Noise rating 

63 dB at 22 feet

Spark plug

NGK BP7ES

2

Summary of Contents for PW3100
























Reviews: