background image

WARNING: 

Never make changes to the nozzle while the trigger is engaged. Doing so could result in 

serious injury or damage to the pressure washer.

WARNING:

 Use extreme caution when pressure washing. Do not pressure wash when people or ani-

mals are around. Do not point the spray gun at others, as serious injury or even death could occur.

INSTALLING THE SPRAY NOZZLE

WARNING:

 Always turn off the pressure washer and engage the safety lock on the trigger gun before 

connecting and disconnecting spray nozzles to avoid injuries from accidental startups. 

This electric pressure washer is equipped with five quick-connect nozzles. Determine the spray nozzle that best suits 
your cleaning task. Test a small area first to avoid surface damage.
• 40° nozzle (gray) - for gentle cleaning on cars, trucks, boats, patio furniture, or lawn equipment.
• 25˚ nozzle (green) - for general cleaning on home siding, brick patios, wood decks, driveways, or sidewalks.
• 15˚ nozzle (yellow) - for tough jobs like stripping paint, removing oil stains, grease or rust.
• 0˚ nozzle (red) - for powerful spot cleaning or hard-to-reach areas. Use extreme caution when using this nozzle!
• Soap nozzle (black) - for detergent application.

1. Make sure the pressure washer is turned off and the water supply is shut off.

OPERATION

8

USING THE SPRAY GUN

1. To apply safety, flip open the safety lock behind the trigger until it clicks into the slot (Fig. 6). To release safety, 
return the safety lock until it snaps onto the trigger. 

2. Pull back the trigger to begin operating the pressure washer. Release trigger to stop the water flow.

Fig. 6

Fig. 7

Trigger

Quick-Connect
Collar

Safety Lock

2. Pull the trigger to release any pre-existing water pressure in the machine.

3. Engage the gun safety lock by flipping it open until it clicks into the slot (Fig. 6). 

4. To connect the nozzle, snap the desired nozzle onto the quick-connect collar until it 
clicks into place (Fig. 7). 

5. To disconnect the nozzle, place one hand over the nozzle and use the other hand to pull back on the quick-
connect collar. CAUTION: the nozzle may spring out when the collar is pulled back. 

Summary of Contents for PW21

















Reviews: