5. Disconnect the water hose.
WARNING:
Only disconnect the high-pressure hose from the trigger gun or the
pressure washer when there is no pressure in the system.
6. Engage the gun safety lock before storing the pressure washer.
MAINTENANCE & STORAGE
NOTE:
Replacement parts for your pressure washer can be ordered at WENproducts.com. Use only identical
replacement parts.
HIGH PRESSURE HOSE
The high pressure hose can be easily damaged and should be stored carefully. Do not kink the hose. Do not drive
vehicles over the hose. Do not expose the hose to sharp objects. Inspect hose for cuts, bulges, or leaks which can
develop from kinking or wear. If damage is found, replace the hose immediately.
WARNING:
If the hose is damaged, do not use the unit or try to repair the hose. Always replace with an
identical part before operation.
SPRAY NOZZLES
Regularly clean the nozzles, preferably after every use, to prevent nozzles
from clogging and ensure good performance of the machine.
1. Release the trigger, shut off the unit, unplug the power plug and turn off
the water.
2. Remove the nozzle from the spray lance. CAUTION: the nozzle may
spring out when released from the lance.
3. Use the nozzle cleaner or a small paper clip to dislodge any foreign
materials that are clogging or restricting the spray tip (Fig. 11). Flush water
through the back end of the nozzle and spray wand with your garden hose
for 30-60 seconds to remove any debris.
Nozzle Cleaner
WARNING:
Risk of electric shock. Always switch off the pressure washer, disconnect the power plug
and turn off the water before performing any maintenance.
10
SHUTTING DOWN THE UNIT
1. Turn the power switch to the OFF position (Fig 10).
2. Unplug the power plug from the outlet.
3. Turn off the water source.
4. Pull the trigger to relieve all the built-up pressure in the pressure washer.
OPERATION
Fig. 10
Fig. 11
WATER INLET ADAPTER
Routinely check and clean the water inlet adapter. Remove the water inlet adapter and rinse with warm water to
