11
KNOW YOUR GENERATOR
CONTROL PANEL
1
2
3
4
5
6
9
13
11
1. Indicator Lights
The output light (green) will turn on when the recep-
tacles have power, the overload light (red) will turn
on if the generator is overloaded, the oil light (yellow)
will turn on if the oil is low.
2. Choke Button
Adjusts the amount of air allowed into the engine dur-
ing startup.
3. Engine Switch
Easily switch the generaotr ON and OFF.
4. Circuit Breaker
Push the button to reset the circuit.
5. Data Meter
Displays voltage, frequency, total runtime (HHHH),
and session runtime (HH:MM). Press the MODE but-
ton to switch between displays.
6. Eco-Mode Switch
Flip this switch to ON to increase fuel economy and
runtime when the load is below 3750W (75% load).
7. Overload Reset
If the overload light is ON, press this button to reset.
8. Voltage Selector Switch
Switch between 120V and 240V outlets.
9. NEMA L14-30R
AC 120V/240V split-phase. Only active when 240V is se-
lected.
10. AC 120V NEMA TT-30R
Standard RV connector. Only active when 120V is selected.
11. AC 120V NEMA 5-20R Duplex Receptacles (20A)
Standard household outlets. Only active when 120V is se-
lected.
12. Grounding Nut
13. DC 5V USB Ports
The upper USB port provides 2.1A, while the lower port
provides 1A of power.
14. CO WATCHDOG Carbon Monoxide Monitor
Measures the accumulation of poisonous CO gas while the
generator is running. If the level of CO gas gets too high,
the CO Watchdog system will automatically shut down the
generator. See p. 23 for more information.
7
8
10
11
12
14