GENERAL SAFETY RULES
Safety is a combination of common sense, staying alert, and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications,
limitations, and possible hazards.
2. KEEP WORK AREA CLEAN. Cluttered areas invite injuries and accidents.
3. OBSERVE work area conditions. Keep work area well lit.
4. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces that are
slippery with sawdust or wax.
5. STORE IDLE EQUIPMENT. When not in use, store the service cart in a safe and clean location.
Always secure products and keep out of reach of children.
6. USE THE RIGHT PRODUCT FOR THE JOB. There are certain applications for which this item was
designed. Do not modify it and do not use it for a purpose for which it was not intended.
7. CHECK FOR DAMAGED PARTS. Before using any product, any part that appears damaged should be
carefully checked to determine that it will operate properly and perform its intended function. Check for
any broken or damaged parts and any other conditions that may affect its operation. Replace or repair
damaged or worn parts immediately.
8. WHEN SERVICING use only identical replacement parts and accessories. Using any other parts will
void the warranty.
9. DO NOT operate the tool if you are under the influence of drugs, alcohol, or medication that may
affect your ability to properly use the tool.
10. USE EYE PROTECTION. Always wear ANSI approved impact safety goggles.
11. DO NOT EXCEED THE PRODUCT’S MAXIMUM LOAD CAPACITY. Always keep weight evenly
distributed.
12. ONLY USE ON A FLAT SURFACE capable of supporting the item with its maximum capacity load. It
is easy to lose control if attempting to pull a load on a sloping or uneven surface.
13. DO NOT ALLOW CHILDREN TO PLAY ON, stand upon or climb on this item. It is not intended for
carrying people or animals.
14. ALWAYS CHECK HARDWARE and assembled parts after assembling. All connections should be
tight.
WARNING:
Read and understand all warnings, cautions and operating instructions before
using this tool. Failure to follow all instructions listed below may result in personal injury and
tool damage.
4
