ROSARIO 21" END TABLE SIENA
90017/WDC-SIE-1121ET
Assembly Instructions
Step 1: Remove all protective materials and check all component pieces against parts
list.
Step 2: Place the table top on a flat surface to start assembly.
Step 3: Screw the bolt D into Top A and tight, Attach the leg B on top A (As photo 1),
Use washer, locker washer and nut , don't tight the nuts now.the same operation on
the other side.
Step 4: Attach the attachment C to the leg B, Use small washer, small locker washer
and hex bolt.(As photo 2) the same operation on the other side. and please tight all the
nuts and cover all the nuts with plastic cap .
Step 5: Turn over the table.
page 1 of 2
photo 1
photo 2
photo 3
page 1 of 2
