7
ASSEMBLY
6. Insert the carriage bolts (Fig. 4 - 1) up through the
leg tabs and the shelf tray. Attach the casters (Fig. 5 -
1) by first hand tightening the washers (Fig. 5 - 2) and
nuts (Fig. 5 - 3). Once all four casters are in place, go
back and use an adjustable wrench to make sure all
nuts and bolts are fully tightened and secure.
NOTE:
To maximize control, we suggest installing the
fixed casters on the same side as the handle, while
the swivel casters go on the opposite side of the cart.
However, if you prefer to have them the opposite way
in order to make sharper turns and pivots, that will
also work.
7. Turn service cart upright and install the towel rack
(Fig. 6 - 1). Make certain all hardware is tight and that
the casters roll properly before adding any weight
onto the cart.
Fig. 4
Fig. 5
Fig. 6
1
3
2
1
1