![background image](http://html1.mh-extra.com/html/wen/6559/6559_manual_956448006.webp)
SPECIFIC RULES FOR THE JOINTER
WARNING:
Do not let comfort or familiarity with the product replace strict adherence to prod-
uct safety rules. Failure to follow the safety instructions may result in serious personal injury.
6
1. TOOL PURPOSE. This jointer is designed for creating flat surfaces on wood or wood-like products
only. Smoothing other materials could result in fire, injury, or damage to the workpiece. Using the ma-
chine for any other purpose for which it is not designed may result in serious injuries, machine damage
and voiding of the warranty.
2. MACHINE MOUNTING. For the operator's safety, the jointer must be securely mounted onto a flat
and stable surface or stand.
3. PERSONAL SAFETY.
• Always wear ANSI Z87.1-approved glasses with side shields, hearing protection, and a dust mask.
• DO NOT wear loose clothing or jewelry, as they might get drawn in by the tool. Tie back long hair.
• DO NOT wear gloves while operating this machine.
4. ELECTRIC CORDS. Keep cords away from heat, oil, sharp edges, and moving parts of the tool. Have
an electrician replace or repair damaged or worn cords immediately.
5. TOOL & ACCESSORIES INSPECTION. Before operation, check the tool and accessories for any dam-
age or missing parts. Do not use the tool if any part is missing or damaged. Make sure all adjustments
are correct and all connections are tight. Keep all guards in place. Make sure all moving parts are free
from interference.
6. JOINTER ACCESSORIES.
• Do not use blades, or any accessories that are damaged or worn. Replace blades as they become
damaged or dull.
• Make sure all blades and accessories are sharp enough for the task at hand before using them.
• Make sure blades are aligned and properly attached to the cutterhead before using your planer.
• Always turn off and unplug the unit before doing any cleaning or maintenance. Use a brush or com-
pressed air to remove chips or debris. Never use your hands to remove excess material and debris.
7. Allow the jointer to come to full speed before using the machine.
8. WORKPIECE REQUIREMENTS. Check the workpiece carefully for splits, knots, nails, or other ob-
structions. These types of blemishes may cause a safety risk during smoothing.
9. USE HIGH QUALITY LUMBER. Blades last longer and cuts are smoother with higher quality wood.
10. DO NOT joint material shorter than 8-1/8", narrower than 3/4", or thinner than 1/4". Never make a
jointing cut deeper than 1/8". Use a push block or push stick for jointing material narrower or thinner
than 3".
11. PREVENTING ACCIDENTAL STARTING. Make sure the power switch is in the OFF position prior to
plugging in the machine. Always make sure the power switch is in the OFF position and the machine
is unplugged when doing any cleaning, assembly, setup operations, or when not in use.
Summary of Contents for 6559
Page 20: ...EXPLODED VIEW PARTS LIST 20 ...
Page 24: ...THANKS FOR REMEMBERING ...