PREPARATION AND ADJUSTMENTS
LOADING THE FASTENERS (Figs. 7, 8)
WARNING:
Always load the fasteners AFTER connecting the air supply. Never aim the tip of the
nailer at a person or animal in case of misfire.
1. Slide the feeder shoe (Fig. 7 - 2) all the way to the
back of the magazine until it latches into place.
2. Check that the angle setting is properly set for your
nails. Place the nails into the magazine slot with the tip
pointing downwards. Slide the nails forward against the
front of the magazine.
3. Pull the feeder shoe backwards, and press the maga-
zine lock (Fig. 7 - 1) to release the feeder shoe. Guide
the feeder shoe forward against the nails to secure them
in position (Fig. 8). Check that the nails have been load-
ed correctly and securely.
NOTE:
Pay attention to the nail count and reload be-
fore the nail count runs low. Your nailer is equipped
with an anti-dry-fire mechanism. When the quantity of
fasteners in the magazine drops below three, the nailer
will not fire.
Fig. 7
Fig. 8
1
2
11
Summary of Contents for 61731
Page 18: ...EXPLODED VIEW PARTS LIST 18...