Wen 21D Manual Download

Page: 3 / 12

INTRODUCTION

Thanks for purchasing the WEN Engraver. We know you are excited to put your tool to work,

but first, please take a moment to read through the manual. Safe operation of this tool requires

that you read and understand this operator’s manual and all the labels affixed to the tool. This

manual provides information regarding potential safety concerns, as well as helpful assembly

and operating instructions for your tool.

NOTE:

The following safety information is not meant to cover all possible conditions and

situations that may occur. WEN reserves the right to change this product and specifications

at any time without prior notice.

Keep this manual available to all users during the entire life of the tool and review it

frequently to maximize safety for both yourself and others.

SAFETY ALERT SYMBOL:

Indicates danger, warning, or caution. The safety symbols

and the explanations with them deserve your careful attention and understanding. Always

follow the safety precautions to reduce the risk of fire, electric shock and personal injury.

However, please note that these instructions and warnings are not substitutes for proper

accident prevention measures.

Summary of Contents for 21D












