![background image](http://html1.mh-extra.com/html/wen/10165/10165_operators-manual_956218005.webp)
5
WARNING:
LASER RADIATION. Class 2 laser. DO NOT STARE INTO THE BEAM.
SPECIFIC SAFETY RULES FOR THE LASER DISTANCE MEASURE
WARNING:
Do not let comfort or familiarity with the product replace strict adherence to product safety
rules. Failure to follow the safety instructions may result in serious personal injury.
WARNING:
Do not direct the laser beam at persons or animals. Do not stare into the direct or reflected
laser beam, not even from a distance. Looking into the laser beam or directing the laser beam into someone’s
eyes can cause eye damage, blindness, and cause accidents.
Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING:
Read and understand all warnings, cautions and operating instructions before using this
device. Failure to follow all instructions listed below may result in personal injury and device damage.
10.
Replacements.
Should any component of your Laser Distance Measure be missing/damaged or fail in any
way, turn the device off. Replace the missing, damaged, or failed parts using only identical replacement parts
before resuming operation.
11.
Do not leave the switched-on measuring device unattended.
Switch the measuring tool OFF after use. Other
persons could be blinded by the laser beam.
12.
Protect the measuring device against moisture and direct sunlight.
Store in a dry, shaded location. Do not
store at temperatures lower than
14°F or higher than 104°F.
13.
Do not subject the measuring device to extreme temperatures or variations in temperature.
For example,
do not leave the measuring device in cars for extended periods of time. In case of large variations in temperature,
allow the measuring tool to adjust to the ambient temperature before using it. The measuring device should stay
within the temperature range of 14°F - 104°F.
14.
Avoid heavy impact and dropping of the measuring device.
If the device is dropped or damaged, perform
an accuracy test before resuming operation. Replace the missing, damaged, or failed parts using only identical
replacement parts before resuming operation.
15.
Remove the batteries before storing for an extended period of time.
16. DO NOT point the laser beam into the sky and/or at an aircraft.
These safety instructions can’t possibly warn of every scenario that may arise with this device,
always make sure to stay alert and use common sense during operation.
Summary of Contents for 10165
Page 15: ...NOTES 15 ...
Page 16: ...THANKS FOR REMEMBERING ...