15
Owner’s Manual
WMC-2500
6. TARGET TEMP
Displays the unit set temperature for ROOM/COOL mode only.
7. SET TEMP BUTTONS
Change target temperature/data value by +/-1. Change data value by +/- 10 by pressing con nu-
ally.
Press the SET TEMP BUTTONS to set temperature.
Upper bu on is to higher temperature and Low bu on is to lower temperature.
8. DEHUMIDIFICATION MODE.
Enter to Dehumidi
fi
ca on Mode if you press SPOT/COOL bu on and ROOM/COOL bu on to-
gether for 1 second.
In Dehumidi
fi
ca on mode, it will blink DEHUMID. Indicator LED,
If you want to use air condi oner, press SPOT/COOL bu on and ROOM/COOL bu on together for
1 second again.
9. ALARM
Alarm indicator lights (blinks) and indicates abnormal system opera on. If Alarm occurs,
compressor stops. System opera on stops when ALARM light is ac vated (blinks) longer than 3
minutes.
*DATA INITIALIZATION
It will be ini aliza on when you pressed “SPOT+ROOM” together more than 5 seconds.
If you pressed bu on together, you can see “in it” and blinking 2 seconds.
Then reset your target temperature.
*OFF-TIMER
The TIMER control turns o
ff
within a 12-hour period.
Enter to Timer Se ng Mode if you press BLOWER bu on and SPOT/COOL bu on together for 1
second.
Press UP/DOWN bu on to set the mer un l it shows the
fi
gure you want to set. (Se ng is avail-
able per 30 minutes)
A er 5 seconds or press SPOT/BUTTON, the
fi
gure will be memorized and compressor will stop
a er the me set.
OFF Timer is hold un l me up even though the unit restarts by power failure etc.
*AUTO RESTART
If the unit goes o
ff
due to an electrical interrup on, the unit will automa cally restart when the
power resumes.
