manualshive.com logo in svg

Weltem AmeriCool WMC-2500, Owner'S Manual

Share
Download
Weltem AmeriCool WMC-2500 Owner'S Manual Download Page 3

3

Owner’s Manual

WMC-2500

* The WMC-2500 is used in conjunc  on with various accessories to adapt to your envi-
ronmental needs. These accessories (Portable Kit, Server Rack Kit, Hanging Kit, Stack Kit) 
are sold separately to allow you to customize the WMC-2500 to your speci

fi

 c needs

Shipping list

Modular air condi  oner 1 unit
Owner’s Manual 1 pcs
Power Cord Holder 1 pcs
Drain hose (20   length) 1 pcs

Thank you for selec  ng this AmeriCool by Weltem Modular Air Condi  oner. It provides 
you with spot cooling for large areas where cooling of an en  re area is not prac  cal or 
possible. 

Please read this manual

 before installing the WMC-2500 as it provides impor-

tant informa  on that should be followed during installa  on and maintenance of the 
Portable Air Condi  oner, allowing you to correctly set up your system for the maximum 
safety and performance. Included is informa  on on customer support and service, if it is 
required. If you experience a problem with the unit, please refer to the Troubleshoo  ng 
sec  on in this manual to correct the problem. If the problem is not corrected, please 
collect informa  on so that the Technical Support personnel can more e

ff

 ec  vely assist 

you.

Summary of Contents for AmeriCool WMC-2500
























Reviews:

No comments

Brands by name

Popular brands

Load more brands