SIP SIP-Phone Administration Guide
87
-set Set password of root or user
-clean Clean current password configuration
Example:
passwd –set root rootpas
passwd –set user userpas
1.
–set
: set password of “root” users or “user” users. (
passwd –set root/user
“password”
)
2.
–clean
: clean up password restored before, and user can login :”root/user,
password: ”press enter”.
User who requests authorization to execute
all
configuration commands needs to
login with “root”. If a user login with “user”, only commands below are functional:
1. ifaddr
2. pbook
3. password
set
user
“password”
4. commit
5. reboot
18. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the SIP-Phone.
Note:
After user upgrade new software version, suggested to execute this command to
make sure new software works well on SIP-Phone.
19. [commit] command
Save any changes after configuring the SIP-Phone.
Type
commit
then following figure will be shown.
This may take a few seconds, please wait....
Commit to flash memory ok!
20. [reboot] command
After typing
commit
command, type
reboot
to restart the SIP-Phone.
