SIP SIP-Phone Administration Guide
15
Chapter 2 Configuring the SIP-Phone through LCD Phone menu
Note:
1. After any configuration is made for the SIP-Phone, user has to do
Reboot
in the
selection 7 “Reboot”.
2. We suggest user to set IP address via LCD menu 5
→
2.3.4.5 first, then go to
chapter 3 to do other detail configurations via web browser.
2.1 Initialize SIP-Phone
2.1.1 When power on the SIP-Phone, the LCD screen shows as below. Now SIP-Phone
is initializing.
S y s t e m I n i
t
i a l
i z i n g . . .
2.1.2 SIP-Phone will show initialize procedures on LCD according to booting
sequence.
2.1.2.1 DHCP
Mode:
D H C P
S e a r c h i n g . . .
2.1.2.2 PPPoE
Mode:
P P P o E C o n n e c t
i n g. . . .
2.1.2.3 Provision
Server:
P r o v i s i o n
S e r v e r
C o n n e c t
i n g . . .
2.1.2.4 Proxy
Mode:
P r o x y R e g i s t e r i n g . . .