SIP SIP-Phone Administration Guide
86
-app Update main application code(optional)
-s IP address of TFTP/FTP server
-f File name
-method Download method to be TFTP/FTP (0:TFTP, 1:FTP)
-ftp Specify username and password for FTP
Example:
rom -method 1
rom -ftp vwusr vwusr
rom -app -s 192.168.4.101 -f app.bin
1.
: show all current configurations and version information.
2.
-app
: upgrade application code.
Note:
After upgrade Application, please remember to execute flash –clean command,
which will clean all configurations and become factory values except parameters
under
ifaddr
command..
3.
-s
: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware
rom file.
4.
-f
: the file name prepared for upgrading is necessary as well.
5.
–method
: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)
6.
–ftp
: specify user name and password for FTP download method.
For example: User prepares to upgrade the latest app rom file – siplp.100, the TFTP
server is 192.168.4.1.1.
rom –app –s 192.168.1.1 –f siplp.100
Command
rom –print
can show current version installed in SIP-Phone .
Download Method : TFTP
Application Rom : siplp.100
17. [passwd] command
For security protection, user has to input the password before entering Telnet
management interface. Two configurations of login name/password are supported by
the system.
Type
passwd
then following figure will be shown.
Password setting information and configuration
Parameters:
