Welltech Computer Co., Ltd.
Audio). This enables tone generation to the Terminals after handset off-
hook.
•
Q.931 Outgoing Opt.: used for Q.931 outgoing behavior
o
0x00000002: Automatic generation of
`
Sending-complete
'
information
element in SETUP (as result of Place Call)
.
When this bit is set , Board
does not generate automatically the 'Sending-complete' information
element in the SETUP. The User application must request it in the Place
Call function. Otherwise (if this bit is not set), the Board generates it
automatically in the SETUP message only.
o
0x00000010: use Mu-law if this bit is set, or A-law will be used. Apply
only for Korea variance, you can OR the required option together
o
0x00000080: When this bit is set, ISDN stack uses the KEYPAD IE to
store the called number digits instead of the CALLED_NB IE. Only
applicable for KOR variant (Korean network). Useful for Korean switches
that do not accept the Called_nb IE.
o
0x00000100: When this bit is set, ISDN Stack forces the sending of a
Channel-id IE in an outgoing SETUP message even if it is not required by
the standard(i.e., it is optional only ), and no Channel-id was specified in
the establishment request. This is useful to increase compatibility with
switches that require it . On PRI lines it indicates a not yet used channel id,
preferred only.
o
0x00000200: When this bit is set, ISDN Stack sends G..711 A-Law in
outgoing voice calls. When this bit is cleared, ISDN Stack sends default
G.711-Mu-Law in outgoing voice calls. Applicable for 5ESS variant (T1).
•
Trans Cap: Transfer Capability
o
Voice Service
o
Data Service
o
Modem Service
•
CallID Transfer Type: Call ID transfer type
o
Disable Caller ID: default parameter
o
Transparent Caller ID
o
Relay Caller ID
o
Bypass Caller ID
Reset Configuration
Reset a channel or a trunk idle state.
Start Path: Configuration
→
Interface
→
Detail
→
Reset
WellGate 5250 User Guide – V5.1
- 63 -