WELLTECH WellGate 3511N, Technical Manual

Page: 63 / 108

WellGate 3511N Technical Manual EN-V100
Copyright © 2007 Welltech Computer Co., Ltd. All right reserved. 63
“ x ”. Symbol “ + ” means “ or ” , “ x ” could be numbers 0~9 . For example, if user set Replace
rule as 002+009->005 , which means if user dial 002 87654321 or 009 87654321, these
number will be dial out as 005 87654321.
3) Dial Plan: User can set how many digits or which number for Gateway to dial out
immediately. Available parameters are “ 0~9” , “ #” , “ *” , “ +” , “ x” . Symbol “ + ” means “ or ” ,
“ x ” could be numbers “ 0~9” . For example, user can set Dial Plan as “ 911+x*xx ,
which means if user dial 911 , 87654321 , or *11 , these number will be dial out immediately
without waiting for dial time or pressing # sign.
4) Add Prefix: If user set Auto Prefix number, all number dialed out will be added with this
prefix number. Available parameters are “ 0~9” , “ #” , “ *” .For example, user set Auto Prefix
as 02, number 87654321 will be dial out as 02 87654321.
5) Prefix Unset Plan: User can set special access code to disable Auto Prefix function in
single call. Available parameters are “ 0~9” , “ #” , “ *” , “ +” , “ x” . Symbol “ + ” means “ or ” , “ x ”
could be numbers “ 0~9” . For example, if user set Prefix Unset Plan as * 1+xxxxxxxxx x.
When dialed number as *1 87654321 or 10 digits of number, for this call will not be added
with Auto Prefix number.
¾
PSTN Routing Prefix
1) Prefix List: The prefix defined here will be routed to PSTN (FXO) instead of VOIP.
¾ Codec
1) Precedence: Set codec priority sequence.
2) Rate: Set G.723.1 codec with 5.3 or 6.3k mode.
¾
T.38(FAX)
1) T.38: Check to enable T.38 function.
2) T.38 Port: Set T.38 port for FAX.
3) Fax Modem Detection Mode: Auto, FAX , Modem
i. Auto: Automatically detect whether the answer tone is for fax or modem. For Fax, it
will start T.38 fax relay while modem will start modem bypass.
ii. FAX: When detect the modem answer tone, it will not start the bypass feature. Only
fax tone will start t.38 fax relay.
Modem: Only detect modem answer tone for modem bypass .
¾ Hot Line
1) Use Hot Line: Check to enable Hot Line function.
2) Hot Line Number: Set the destination number for Hot Line function..
¾ DND (Don’t Disturb)
1) DND Mode: You can select 3 mode of DND. The call will be always rejected if Always is
selected. The call will be rejected by below Time setting (From and To) if Enable is
selected. The call will be accepted if Disable is selected.