WELLTECH WellGate 3511N Technical Manual Download Page 101

Page: 101 / 108

WellGate 3511N Technical Manual EN-V100

101

page of TCP/IP

LAN to set the network settings to connect with WG3511N-A. Maybe you

could set the IP to 192.168.123.200 and set Default Gateway to 192.168.123.123.

Step5: Go to the page of Wireless

Basic Settings, set the mode to Client and set the

Network Type to Infrastructure.

Step6: Go to the page of Wireless

Security, to set the necessary authentication method for

WG3511N-A if WG3511N-A has enable authentication.

Step7: Go to the page of Wireless

Site Survey to search and connect to WG3511N-A.

When connection is OK, there should be a successful message appeared.

Step8: At this time, the PC connected to the LAN of WG3511N-B could be able to reach the

WG3511N-A, and access Internet via it.

Client (Ad-hoc)

If Client (Ad-hoc) is enabled, the WG3511N can work like a wireless station when it’s connected to a computer

so that the computer can send packets from wired to wireless interface. You can share files and printers

between wireless stations. Below is an example to show you how to implement Client (Ad-hoc) mode.

WG3511N (Client mode with Ad-hoc)

LAN

WLAN

PC connected with LAN
port of WG3511N

PC and Notebook with
Wireless Network Adapter

Step1: Power on WG3511N and set one pc to connect with WG3511N. Set PC to a Fixed IP,

such as 192.168.123.100.

Step2: Enter 192.168.123.123 for the WEB interface of WG3511N with no login ID and

password.

Step3: Go to the page of Wireless

Basic Settings, set the mode to Client and set the

Network Type to Ad-hoc.

Step4: Go to the page of Wireless

Security, to set the necessary authentication method.

Step5: At this time, the PC or Notebook with wireless network adapter should be able to

search the WG3511N and use WiFi to send packets to PC connected to the LAN of

WG3511N.

Summary of Contents for WellGate 3511N

































































































Search results

Summary of Contents for WellGate 3511N

Reviews:

Related manuals for WellGate 3511N

Brands by name

Popular brands

WELLTECH WellGate 3511N, Technical Manual

Search results

Summary of Contents for WellGate 3511N

Reviews:

Related manuals for WellGate 3511N

Brands by name

Popular brands