WELLTECH SIP PHONE Manual Download Page 58

Page: 58 / 59

SIP SIP-Phone Administration Guide

3. Remote Control: Telnet

Please refer to chapter

4.18 [rom] command

1. -print

: show all current configurations and version information.

2. -app

-boot

-dsptest

-dspcore

-dspapp

,: upgrade main boot code, main

application code, DSP testing code, DSP kernel code, DSP application code, Ring
Back Tone PCM file and Hold Tone .

Note:

After upgrade Application, please remember to execute flash –clean command,
which will clean all configurations become factory values except IP address.

3. -boot2m

: to upgrade 2mb rom file, which includes all firmware file mentioned in

item 2.

4. -s

: it is necessary to prepare TFTP/FTP server IP address for upgrading firmware

rom file.

5. -f

: the file name prepared for upgrading is necessary as well.

6. –method

: specify download method to be TFTP or FTP(0 for TFTP.1 for FTP)

7. –ftp

: specify user name and password for FTP download method.

For example: User prepares to upgrade the latest app rom file – siplp.100, the TFTP
server is 192.168.4.1.1.

rom –app –s 192.168.1.1 –f siplp.100

Summary of Contents for SIP PHONE




























































Search results

Summary of Contents for SIP PHONE

Reviews:

Related manuals for SIP PHONE

Brands by name

Popular brands

WELLTECH SIP PHONE, Manual

Search results

Summary of Contents for SIP PHONE

Reviews:

Related manuals for SIP PHONE

Brands by name

Popular brands