SIP SIP-Phone Administration Guide
47
12. [sysconf] command
1.
-print:
display all current configurations.
2.
-idtime:
set the duration(in second) of two pressed digits in dial mode as timed out.
If after the duration user hasn’t pressed next number, SIP-Phone will dial out all
number pressed.
3.
-keypad:
set DTMF type .User can select DTMF type SIP-Phone receive and
transmit.(
sysconf –keypad 0/1 ,
0 for in band ,1 for RFC2833.)
4.
-2833type:
change RFC2833 Payload type.
5.
-eod
: select end of dialing key, e.g. set end of dial key as “
＊
” button , after finished
pressing dialing number then press “
＊
” will dial out. (
sysconf –eod 0/1/2
, 0 for no
end of dial key , 1 for “
＊
” button, 2 for “
#
” button )
6.
–service
: set SIP Phone to be normal mode or under hotline mode.
(
sysconf –service 0/1
, 0 for normal service, 1 for hotline service.)
Note:
To set SIP-Phone as hotline mode, user has to set SIP-Phone as Peer-to-Peer
mode, and hotline table under
bureau
command.
13. [sip] command
1. –print: display all current configurations.
2. –mode
: configure SIP-Phone as Proxy or Peer-to-Peer Mode.
Usage:
sip –mode 0/1
(1 for Proxy mode, 0 for Peer-to-Peer mode)
