SIP SIP-Phone Administration Guide
47
11. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the SIP-Phone.
Note:
1. After user upgrade new software version, suggested to execute this command to
make sure new software work well on SIP-Phone.
2. To execute the command
flash –clean,
all configuration of SIP-Phone stored in
flash will be cleaned. It is authorized for the user whose login name is “root” only.
12. [sysconf] command
1.
-print:
display all current configurations.
2.
-idtime:
set the duration (in second) of two pressed digits in dial mode as timed out.
If after the duration user hasn’t pressed next number, SIP-Phone will dial out all
number pressed.
3.
–service:
set LAN Phone to work as normal mode or hotline mode. If user wants to
use hotline function, please set service to be 1, and set bureau related configuration.
Please refer to
19. [bureau] command
.
4.
-keypad:
set DTMF type. User can select DTMF type SIP-Phone receive and
transmit. (
sysconf –keypad 0/1,
0 for in band, 1 for RFC2833.)
5.
-2833type:
change RFC2833 Payload type.
