![background image](http://html1.mh-extra.com/html/welltech/sip-phone/sip-phone_user-manual_955968044.webp)
SIP SIP-Phone Administration Guide
43
2. [quit] command
Type
quit/exit/close
will logout SIP-Phone and Telnet Program.
3. [debug] command
This command is for engineers to debug system of SIP-Phone. User can add debug
flag via command
debug –add “debug flags”
, and then start debug function via
command
debug –open
. When SIP-Phone is working on screen will display related
debug messages. Most frequently used debug flag are “sip”, “fsm”, “msg”…etc.
4. [reboot] command
After typing
commit
command, type
reboot
to restart the SIP-Phone.
Sometimes after user type reboot, on terminal screen will display: "Data modified,
commit to flash rom?” which means SIP-Phone will record call history or not. (Ex.
REDIAL, outgoing and incoming call data)
5. [pbook] command
This command is functional both in Proxy mode and Peer-to-Peer mode. In proxy mode,
use speed dial or 10 DL button will dial out e.164 number in phone book. In the other
hand, in peer-to-peer mode, SIP-Phone will dial out IP address.
1.
-print:
display phone book data. User can print all data in phone book by command
(
pbook –print
). Furthermore, user can also print only a section of data by indicate
parameter “start index” and “end index” (
pbook –print “start index” “end index”
).
If parameter “end index” is omitted, only record “start index” will be displayed.
(
pbook –print “start prefix”)
.
2.
-add
: add a new record in phone book table by giving name, IP address, and e.164
number of callee endpoint.
(
pbook –add name “X” ip “xxx.xxx.xxx.xxx” e164 “X”
)
3.
-search:
search any record in the phone book according to IP address, name or