SIP SIP-Phone Administration Guide
14
Chapter 2 Configuring the SIP-Phone through LCD Phone
menus
Note:
1. After any configuration is made for the SIP-Phone, user has to do
Reboot
in the
selection 7 “Reboot”.
2. We suggest user to set IP address via LCD menu 5
→
2.3.4.5 first, then go to
chapter 3 to do other detail configurations via web browser.
1. Initialize SIP-Phone
1. When power on the SIP-Phone, the LCD screen shows as below. Now SIP-Phone is
running Boot sector program.
2. When SIP-Phone finishes boot program initialization. User can see flashing greeting
as below:
3. Then SIP-Phone get into standby mode:
The main LCD screen would be shown as similar as above. “
Proxy
” means the
SIP-Phone is in Proxy Mode, and when SIP-Phone is connected to SNTP server, on
LCD will show current time captured from SNTP server.
4. When SIP-Phone is under peer-to-peer mode, on LCD will show “
P2P
” instead of
“
Proxy
”.
IP-Phone
Board Start Booting
System Initializing…………..
SIP-Phone
Proxy
10:10:10 AM
SIP-Phone
P2P
10:10:10 AM
