SIP SIP-Phone Administration Guide
19
8. SNTP
Configuration
(1) SNTP Mode:
User can set SNTP function to be on or off, which means SIP-Phone will
capture current time from SNTP server or not.
(2) SNTP Server:
User can specify a SNTP server for SIP-Phone to capture current time.
(3) Time Zone:
User can set time zone via pressing
or
according to the location
SIP-Phone is. For example, in Taiwan the time zone should be set as
GMT+8:00.
9. Behind
IP-Sharing
(1)
If SIP-Phone is behind IP sharing or NAT device, on IP sharing must
enable “
DMZ
” function or set “
Virtual Server
” to open ports (UDP port:
5060 and 16384).
(2)
User must enter public IP address of IP sharing.
6. Advanced Settings (protected by password)
Please Enter Password:
User must key in password to enter this menu, selections under this
command are all important ones, which can only be configured by advanced
users.
Note:
1. Default Password is
empty
, user can enter this sub-menu directly, once
password has been set in
3.LCD Menu password
, user must input
password before enter this sub-menu.
2. If user forget password, please contact with the distributor, we will
generate a specific password according to your MAC address of
SIP-Phone.
3. User can also try to configure SIP-Phone via Telnet or Web browser with
default IP address: 10.1.1.3. (This only works when default IP address
hasn’t been changed.)
1. SIP
Settings
(1) Connect Mode
Select SIP connection mode to be peer-to-peer mode or Proxy mode.
