WARNINGS FOR CARE AND USAGE ADVICES
26
•
If your skin reacts to applications, it is your personal
responsibility to seek medical advice as a precaution.
•
Do not exceed the assigned treatment time of a programme
for a body area.
• Do not treat a body area twice at the same day.
• Do not exceed a maximum of 3 treatment days per week.
There should always be a treatment-free day between two
treatment days.
• Do not apply any pressure onto the skin during a treatment.
The Body Lifter´s own weight offers enough pressure to
ensure the contact between the treatment heads and the skin
is sufficient. Only “lay” the Body Lifter´s treatment heads on
the skin.
• The Body Lifter should not be used in the vicinity of shortwave
and microwave therapy devices, as well as mobile high frequency
equipment (e.g. mobile phones), since this can lead to the fluctuations
in the output values. The distance should be at least 1 meter.
• When carrying out a treatment with the Body Lifter, only use the
BYAS Body Forming Gel as both are specifically matched to
each other. The gel supports the effect of the Body Lifter. This is
not possible if other gels are used, which do not have special fat
formation inhibiting and fat breakdown stimulating properties.
• Make sure that there is always enough gel under the treatment
heads to avoid possible skin irritations. Increase the amount of gel
used, if necessary, particularly when you have a strong sensation
of warmth on the skin during the treatment.
• The gel is only for external use on the skin of the following
body
areas: arms, waist, abdomen, but, hips and legs (face
excluded).
• Always hold the Body Lifter in a position during a treatment that
ensures all four treatment heads touch the skin evenly. In case of
uneven contact, the device´s ATSEC
®
system and PES
®
system are
being activated to protect against possible overheating (device´s
output is being stopped for approx. 5 seconds).
• Keep the Body Lifter and the gel away from children.
• Do not store the gel at temperatures exceeding 25°C. Store your
Body Lifter in a dry place.
• The Body Lifter must be always fully switched off during
the cleaning.
• The device is not waterproof. Do not wash the device with water
and do not keep it under the running water.
• Clean the application disc with a damp cloth after each application.
Do not use any aggressive or chemical cleaning agents.
• The nominal input voltage is 180-240 V AC, meaning that you can
use the Body Lifter while travelling everywhere around the world.
• Always keep electrical contacts clean, free of dust and dry.
• Service work may only be carried out by authorized persons
or companies.
TO ENSURE YOU USE THE BODY LIFTER ADEQUATELY, PLEASE OBSERVE
THE FOLLOWING INSTRUCTIONS.
