11
During the radio-frequency treatment you do not necessarily notice
a strong heat generation on your skin. This is because the radio-
frequency waves of the Body Lifter are especially matched to the
body's skin. In this way, they warm the skin but do not cause any
excessive heat sensation in the sensitive receptors, especially those
in the upper skin layers. Nonetheless the effective breakdown of
subcutaneous fat deep under the skin is stimulated and the collagen
fibres in the connective tissue caused to become firmer. Also be aware
that the sensation of heat depends very much on your skin´s specific
characteristics, such as thickness and proportion of fat.
The BYAS Body Lifter operates with the BYAS-exclusive ATSEC
®
System (Automatic Temperature Safety Control). This allows a constant
measuring of the skin temperature during the RF programmes through
the quad treatment electrodes. If the warmth absorbed by the skin
within a treatment reaches the programmed lower skin temperature limit
of 42 ° C, the BYAS-exclusive PES
®
System (Personal efficacy system)
reminds the user with a pulsating acoustic signal during the treatment
to move the Body Lifter to another part of the chosen body area. When
the skin temperature reaches the programmed maximum temperature
of 45 ° C, the pulsating acoustic signal becomes continuous, lasting
for about 3 or 4s. Simultaneously, the Body Lifter´s output is stopped
to allow the skin temperature to fall. As soon as the skin temperature
starts declining, the continuous acoustic signal becomes pulsating
again. When the measured warmth in the skin reaches 42 ° C again,
the Body Lifter´s output is continued. If the skin temperature declines
below 42 ° C, the pulsating acoustic signal stops automatically.
The Body Lifter´s High Frequency Electrical Muscle Stimulation
Technology (HF-EMS
®
) strengthens and firms the muscles in a highly
effective way. HF-EMS
®
is even compatible with sensitive skin types, as
the EMS´s pulse activation is specially tailored to the sensitive muscle
structures.
After you have chosen an EMS programme, carry out the treatment as
follows: Place the Body Lifter´s quad treatment electrodes on the area
to be treated and simply start to carry out slow, stroking movements
with the Body Lifter.
Do not treat any region of the body twice on the same
day
With three treatment days per week – always with one
treatment-free day between each treatment day – you have the
right rhythm for success in obtaining optimal results with the
Body Lifter.
Always keep to the following treatment sequence to
ensure optimum effects
1.
Lay the Body Lifter´s quad treatment heads of the on the first
part of the area of the skin to be treated.
2. Move the Body Lifter twice in circular movements for
3 - 4 seconds over a plum-sized part of the treatment area without
applying any pressure!
3. Then, lay the quad treatment heads on the next plum sized part
of the skin area to be treated and repeat the whole process until
you have treated the whole area of the
skin to be treated completely.
RADIO-FREQUENCY APPLICATIONS
EMS APPLICATIONS
