Wells WV-4HSRW Operation Manual Download Page 18

CLEANING INSTRUCTIONS 

CAUTION: 

Electric Shock   
Hazard 

 

Disconnect appliance from 
electric power before      
cleaning.

 

 
CAUTION: 

Hot Surface 
 

Exposed surfaces 
can be hot to the touch 
and may cause burns.  Allow 
appliance to cool before 
cleaning.

 

 

IMPORTANT: 

DO NOT spill or pour water 
into controls, control panel,    
wiring or coil-type hotplate         
elements.  Damage to internal             
components will occur. 
Damage to internal 
components from water 
damage is 

not 

covered by 

warranty. 
 

IMPORTANT: 

DO NOT use steel wool or 
metal implements to clean 
hotplate elements.

 

PREPARATION  

      

Disconnect appliance from electric power 

       Allow to cool before cleaning 
 

FREQUENCY     

Daily 

 

TOOLS 

      

Warm water and a mild detergent 

       Soft clean cloth or sponge 
       Plastic scouring pad, plastic scraper 
       Razor scraper and Cleaning Crème (ceramic cooktop) 
 
 

CLEANING 

 
       Disconnect appliance from electric power 
       Allow to cool before cleaning 
 
Spiral Hotplate Elements: 

 

       Raise elements.  Remove and empty drip pans. 

 

       Drip pans and element supports may be washed in a sink or    
       dishwasher.  Allow to air dry and reinstall. 

 

       Scrape burned-on food debris from element using a plastic scraper 
       or plastic scouring pad.  DO NOT use steel wool or metal            
       implements to clean elements. 
 
Solid Plate Hotplate Elements: 

 

       Scrape burned-on food debris from element using a plastic scraper 
       or plastic scouring pad.  DO NOT use steel wool or metal            
       implements to clean elements. 

 

       Wipe elements and counter top with a clean cloth or sponge 
       dampened with warm water and a mild detergent.  Rinse by wiping 
       with a clean cloth or sponge dampened with warm water.  Allow to 
       air dry. 
 
Ceramic Cooktop 

 

       Scrape burned-on food debris from ceramic surface using a razor 
       scraper held at a 15º angle to the surface.  DO NOT use steel wool 
       or other metal implements to clean ceramic surface. 

 

       Wipe cooktop and counter top with a clean cloth or sponge 
       dampened with warm water and a mild detergent.  Rinse by wiping 
       with a clean cloth or sponge dampened with warm water.  Allow to 
       air dry. 

 

       Protect the ceramic surface by wiping with Cleaning Crème applied 
       sparingly with a clean cloth. 
 
Procedure is complete. 

16 

Summary of Contents for WV-4HSRW





























Reviews: