COOK
TOP
SOLID (FRENCH PLATE) ELEMENT REPLACEMENT
Applicable to Wells WV-4HF-series ventless appliances.
Wells has introduced an upgraded element terminal lug for solid
(French plate) element cooktops. Units built prior to June 1, 2001
will require this upgrade when replacing elements.
1. When only the Ceramic Terminal Block is damaged and the
Element wire is not fused: Replace with Kit 503972. This
Kit replaces the Terminal Block with the new wire set.
NOTE:
Kit p/n 503972 does not include the element.
.
2. If the element or element wires are damaged, or if the
connector is fused to the power leads, replace with complete
element kit 503973 (240V).
ELEMENT, NEW TERMINAL LUG AND CERAMIC INSULATOR
PN 503973 (240V)
CAUTION:
BURN HAZARD
Hotplate burner surfaces are very
hot during operation. Allow unit to
cool before performing any service.
New wires with lugs spliced to
existing wire set and inserted
into new insulator. Tighten set
screws securely.
IMPORTANT:
Do not cut fused
wire on element to replace terminal
block, this voids U.L.
HOTPLATE COOKTOP UNIT (continued)
SV504 SvcM
anual W
V
-4H(R
W
)
17
2
1
4
ELEMENT
COLD PIN
SPOON SHAPED
TERMINAL LUG
