![Wells WV-4HF Supplemental Service Instructions Download Page 12](http://html1.mh-extra.com/html/wells/wv-4hf/wv-4hf_supplemental-service-instructions_955588012.webp)
VEN
T
ILATOR HO
OD
HOOD SECTION - FILTER SYSTEM
10
NOTE:
Change the pre-filter as
soon as the "
REPLACE
PRE-FILTER
" indicator
glows in order to extend the
service life of the filter pack.
NOTE:
The charcoal portion of the
filter pack is an aid in
controlling cooking odors
only. It will not completely
eliminate such odors.
1. The GREASE BAFFLE separates grease particles and water vapor
from the air stream by the centrifugal force of the air moving through
its inter-leaved baffle plates. Ejecta is collected in the GREASE CUP
through drain holes in the baffle frame and cabinet.
The GREASE BAFFLE POSITION MONITOR plunger switch controls
electric power to the ventilator fan.
2. The PRE-FILTER is composed of a replaceable media filter and a
filter-retaining gage. The pre-filter captures the bulk of grease vapors.
Pre-filter position is monitored by a vacuum switch, which is in the
control circuit of the cooking appliance contactor.
3. The FILTER PACK is composed of a high-efficiency filter to capture
grease vapors down to a very small particle size; and, an activated
charcoal filter to help control cooking odors.
The FILTER PACK POSITION MONITOR plunger switch is in the
control circuit of the cooking appliance contactor.
SV504 SvcM
anual W
V
-4H(R
W
)
FILTER PACK
POSITION MONITOR
GREASE BAFFLE
POSITION MONITOR
HOOD ASSEMBLY
(LOOKING UP)
NOTE AIR FLOW ARROWS ON
GREASE BAFFLE, PRE-FILTER
AND FILTER PACK. INSTALL
THESE COMPONENTS SUCH
THAT ARROWS POINT
TOWARD FAN
FILTER
PACK
PRE-FILTER
ASSEMBLY
GREASE
BAFFLE