Wells WV-2HFG, Owner'S Manual

Page: 7 / 44

M508 p/n 2M-304456 Owners Manual WV
-2HG
FEATURES & OPERATING CONTROLS (continued)
5
FEATURES & OPERATING CONTROLS (continued)
ITEM DESCRIPTION COMMENT
VENTILATOR SECTION CONTROLS
V.01 POWER SWITCH
Energizes blower motor. If, after 10 seconds, proper conditions are met, cooking appliances
are energized.
Appliance light is
ON
when POWER SWITCH is
ON.
V.02
POWER ON
INDICATOR GREEN. Glows when POWER switch is
ON.
V.03
CHECK FILTERS
ALARM INDICATOR
AMBER. Glows if one or more filters are out of position. Check all filters and baffles for proper
installation.
V.04*
REPLACE PREFILTER
ALARM
INDICATOR
AMBER. Glows when PREFILTER is approaching the end of its service life and must soon be
replaced.
V.05*
REPLACE FILTER
PACK ALARM
INDICATOR
AMBER. Glows when FILTER PACK is approaching the end of its service life and must soon
be replaced.
V.06*
SERVICE REQUIRED
ALARM
INDICATOR
RED. Glows when PREFILTER and/or FILTER PACK has reached the end of its service life
and is too loaded to allow sufficient air flow. Filter MUST be replaced. Appliance is
SHUT
DOWN
until expended filters are replaced.
* See PRECAUTIONS & GENERAL INFORMATION, pages 8 for special procedures regarding prefilters and filter packs.
GRIDDLE SECTION
G.01 GRIDDLE TEMPERATURE CONTROL Thermostatic control of griddle temperature
G.02 GRIDDLE HEAT INDICATOR Glows when heating elements are energized.
G.03 GREASE DRAWER Collects cooking waste from GRIDDLE. Removable for cleaning.
G.04 COOKING SURFACE Heated portion for cooking food.
G.05 WASTE TROUGH Scrape cooking waste to this area.
G.06 WASTE CHUTE Cooking waste moved into GREASE DRAWER thru this opening.
HOTPLATE SECTION
H.01 TEMPERATURE CONTROLS Individual infinite switch control of the hotplate HEATING ELEMENTS
H.02 POWER INDICATOR Glows anytime the TEMPERATURE CONTROL is in any position other than
OFF
.
H.03 SOLID HEATING ELEMENTS WV2HG heating/cooking portion. Element is fixed in position.
H.04 SPIRAL HEATING ELEMENT WV2SHG heating/cooking portion. Element lifts out for cleaning.
H.05 TRIM RING Mounts element to cabinet.
H.06 DRIP PAN Catches drippings and crumbs (spiral element only). Removable for cleaning.
OPTIONAL DRAWER WARMER SECTION
W.01 WARMER TEMP CONTROL Infinite switch control of temperature of one warmer drawer.
W.02 POWER ON INDICATOR AMBER. Glows when associated temperature control is turned
ON.
W.03 THERMOMETER (optional) Reads temperature inside drawer cavity. Must be ordered at time of initial build.
W.04 HUMIDITY CONTROL Slide control of shutters to control air circulation within the warmer drawer.
W.05 DRAWER CATCH Holds drawer closed.
W.06 DRAWER STOP Prevents drawer from opening too far. Spring loaded to permit easy removal of drawer.
W.07 DRAWER ROLLERS Support drawer and allow it to open and close smoothly.
W.08 POWER SWITCH (RWT) Energizes unit (RWT-style only)
W.09 CONTROLLER (RWT)
Controls cavity temperature. Readout displays setpoint and actual temperature information.
UP ARROW / DOWN ARROW keys allow modification of setpoint temperature. (RWT-style
units only)