M508 p/n 2M-304456 Owners Manual WV
-2HG
18
CLEANING INSTRUCTIONS
CAUTION:
Electric
Shock Hazard
Disconnect appliance
from electric power before
cleaning.
CAUTION:
Hot Surface
Exposed surfaces can be hot
to the touch and may cause
burns. Allow appliance to cool
before cleaning.
IMPORTANT:
Never allow PRE-FILTER or
FILTER PACK to get wet.
DO NOT wash either of these
two filters. Washing these
filters will ruin them and cause
the appliance to shut-down.
IMPORTANT:
DO NOT spill or pour water
into controls, control panel,
wiring or coil-type hotplate
elements. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
IMPORTANT:
This appliance is not jet
stream approved. Do not
direct water jet or steam jet
at this appliance, or at any
control panel or wiring. Do
not splash or pour water on,
in or over any controls, control
panel or wiring.
IMPORTANT:
DO NOT use steel wool or
metal implements to clean
drawers or cabinet surfaces.
VENTILATOR SECTION CLEANING INSTRUCTIONS
PREPARATION
Disconnect appliance from electric power
Allow to cool before cleaning
FREQUENCY
Weekly
TOOLS
Warm water and a mild detergent
Soft clean cloth or sponge
Bristle brush
Container for disposal of grease
CLEANING
Disconnect appliance from electric power
Allow to cool before cleaning
Remove the grease baffle, pre-filter assembly, grease trough and
grease cup. Empty the grease trough and grease cup.
Remove the pre-filter from the filter frame. Wash and rinse the filter
frame ONLY.
Wash and rinse the grease baffle, grease trough and grease cup in
a sink or dishwasher using mild detergent and warm water.
Allow to air dry.
Reinsert the pre-filter into the filter frame. Reinstall the pre-filter,
grease baffle, grease trough and grease cup.
Procedure is complete
